RANGE OF PERFORMANCE
- Flow rate up to 400 / 24000
- Head up to 11 m
LIMITS OF USE
- Depth up to 5 m
- Liquid temperature up to + 40°C
- Passage of suspended solid bodies up to Ø 40 mm
- Drainage level 40 mm from the bottom
- For continuous duty: minimum immersion 240 mm from pump base
INSTALLATION AND USE
ZX PUMPS ARE RECOMMENDED FOR DRAINING WASTE WATER IN THE DOMESTIC SECTOR, FOR CLEARING DIRTY WATER, EVEN CONTAINING SUSPENDED SOLID BODIES WITH DIMENSIONS UP TO Ø 40 mm. THEY ARE OUTSTANDING IN BOTH THEIR SIMPLICITY OF INSTALLATION AND THEIR RELIABILITY IN FIXED INSTALLATIONS WITH AUTOMATIC OPERATION.
CONSTRUCTION CHARACTERISTICS
- DELIVERY BODY: cast iron, with threaded port ISO 228/1.
- MOTOR CASING: stainless steel AISI 304.
- IMPELLER: open type, in glas filed technopolymer.
- MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
- MECHANICAL SEAL: ceramic - graphite - NBR.
- MOTOR: submersible asynchronous single-phase for continuous duty.
- ZXm: single-phase 220÷240 V - 50 Hz with capacitor and thermal overload protector.
- INSULATION: clas F .
- PROTECTION: IP 68.
- STANDARD FEATURES:
- ZXm Float switch.
- Neoprene power cable "H07 RN-F" length 5 metres with Schuko plug.
|
|
;)