RANGE OF PERFORMANCE
- Flow rate up to 500 / 30000
- Head up to 11 m
LIMITS OF USE
- Depth up to 10 m
- Liquid temperature up to + 40°C
- Passage of suspended solid bodies up to Ø 45 mm
- For continuous duty: minimum immersion 290 mm from pump base
INSTALLATION AND USE
THE PUMPS IN THE MC SERIES ARE MADE OF EXCEPTIONALLY ROBUST HEAVY-GAUGE CAST IRON, RESISTANT TO ABRASION AND LONG-LASTING. THEY ARE EQUIPPED WITH A DOUBLECHANNEL IMPELLER WHICH ALLOWS THE DRAINAGE OF LIQUIDS CONTAINING SUSPENDED SOLID BODIES WITH DIMENSIONS UP TO Ø 45 mm AND SHORT FIBRES. THEY ARE IDEAL FOR PUMPING DRAINAGE WATER AND SEWAGE, WASTE WATER INCLUDING WATER MIXED WITH MUD, GROUNDWATER AND SURFACE WATER IN APPLICATIONS SUCH AS: CONDOMINIUMS, MULTI-STOREY AND UNDERGROUND CAR PARKS, WASHING AREAS AND INDUSTRY.
CONSTRUCTION CHARACTERISTICS
- PUMP BODY: cast iron, with threaded port ISO 228/1.
- MOTOR CASING AND BASE: cast iron.
- IMPELLER: double-channel, in stainless steel AISI 304.
- MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
- DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
- MOTOR: submersible asynchronous for continuous duty.
- MCm: single-phase 220÷240 V - 50 Hz with thermal overload protector.
- MC: three-phase 380÷415 V - 50 Hz.
- INSULATION: clas F .
- PROTECTION: IP 68.
STANDARD FEATURES:
- MCm (single-phase) Float switch.
- Neoprene power cable "H07 RN-F" length 10 metres with Schuko plug.
- Control box with condenser.
- MC (three-phase) Neoprene power cable "H07 RN-F" length 10 metres.
|
|
;)