Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/h2oenggs/public_html/includes/database/mysql.php on line 13
CPm 158 - H2O Engineers and Solutions -
 
H2O Engineers and Solutions
    
         

Fire Fighting Pumps
Hotwater Circulation Pumps
Pressure Pumps
Stainless Centrifugal Pumps
Submersible Pumps

Home :   Hotwater Circulation Pumps :  

CPm 158

Graph : Curves And Performance Data ...

CPm 158


Product Disc: Single Phase


RANGE OF PERFORMANCE

  • Flow rate up to 90/ 5400
  • Head up to 34 m
LIMITS OF USE

    * Manometric suction lift up to 7 m
    * Liquid temperature up to + 90C
    * Liquid temperature up to + 40C in the
    * CPX version
      (with technopolymer impeller)
    * Environment temperature up to + 40C

INSTALLATION AND USE

    * They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC AND CIVIL SECTOR, IN PARTICULAR FOR WATEER DISTRIBUTION IN COMBINATION WITH SMALL OR MEDIUM PRESSURE SETS, FOR TRANSFER IN GENERAL, FOR IRRIGATING GARDENS. The pumps must be installed in enclosed places, or at least protected against inclement weather.

CONSTRUCTION CHARACTERISTICS

    * PUMP BODY: cast iron, with threaded ports ISO 228/1.
    * BODY BACK-PLATE: stainless steel AISI 304 or cast iron on higher powered models.
    * BRASS IMPELLER: CP 100-CP 132-CP 152-CP 150-CP 170-CP 190-CP 200
    * STAINLESS STEEL IMPELLER: CP 130-CP 158
    * MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
    * MECHANICAL SEAL: ceramic - graphite - NBR.
    * ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
      CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector built into the winding.
      CP: three-phase230/400 V - 50 Hz.
    * INSULATION: class F.
    * PROTECTION: IP 44.
    * REGISTERED MODEL n 72753.

CONSTRUCTION CHARACTERISTICS

    * PUMP BODY: cast iron, with threaded ports ISO 228/1.
    * BODY BACK-PLATE: stainless steel AISI 304 or cast iron on higher powered models.
    * BRASS IMPELLER: CP 100-CP 132-CP 152-CP 150-CP 170-CP 190-CP 200
    * STAINLESS STEEL IMPELLER: CP 130-CP 158
    * MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
    * MECHANICAL SEAL: ceramic - graphite - NBR.
    * ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
      CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector built into the winding.
      CP: three-phase230/400 V - 50 Hz.
    * INSULATION: class F.
    * PROTECTION: IP 44.
    * REGISTERED MODEL n 72753.