RANGE OF PERFORMANCE
- Flow rate up to 900 / 54000
- Head up to 16 m
LIMITS OF USE
- Depth up to 5 m
- Liquid temperature up to + 40°C
- Passage of suspended solid bodies up to Ø 50 mm
- For continuous duty: minimum immersion 290 mm from pump base
INSTALLATION AND USE MC SUBMERSIBLE PUMPS ARE
RECOMMENDED FOR DRAINING DIRTY WATER AND SEWAGE IN THE DOMESTIC AND
CIVIL SECTORS. THEY ARE EQUIPPED WITH A "DOUBLE-CHANNEL" STAINLESS
STEEL IMPELLER WHICH ALLOWS THE PUMPING OF LIQUIDS CONTAINING SUSPENDED
SOLID BODIES WITH DIMENSIONS UP TO Ø 50 mm AND SHORT FIBRES. THEY ARE
IDEAL FOR PUMPING DRAINAGE WATER, SEWAGE OR WASTE WATER FOR A SINGLE
DWELLING, AND FOR CLEARING SUFACE OR NUISANCE WATER, EVEN IF MUDDY.
THESE PUMPS ARE OUTSTANDING IN THEIR RELIABILITY IN FIXED INSTALLATIONS
WITH AUTOMATIC OPERATION.
CONSTRUCTION CHARACTERISTICS
- DELIVERY BODY: cast iron, with threaded port ISO 228/1.
- MOTOR CASING: stainless steel AISI 304.
- BASE: stainless steel AISI 304.
- IMPELLER: double-channel in stainless steel AISI 304.
- MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
- DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil
barrier chamber and inner lip seal to protect the seal in the event of
dry running.
- MOTOR: submersible asynchronous for continuous duty.
- MCm: single-phase 220÷240 V - 50 Hz with capacitorr and thermal overload protector.
- MC: three-phase 380÷415 V - 50 Hz.
- INSULATION: class F.
- PROTECTION: IP 68.
STANDARD FEATURES:
- MCm (single-phase) Float switch.
- Neoprene power cable "H07 RN-F" length 5 metres with Schuko plug.
- MC (three-phase) Neoprene power cable "H07 RN-F" length 5 metres.
|
|
;)