RANGE OF PERFORMANCE
- Flow rate up to 500 / 30000
- Head up to 11 m
LIMITS OF USE
- Depth up to 10 m
- Liquid temperature up to + 40°C
- Pasage of solid bodies max Ø 50 mm for MC 15-20-30/ 50
- Pasage of solid bodies max Ø 70 mm for MC 30/ 70
- For continuous duty: minimum immersion 420 mm from pump base
INSTALLATION AND USE
MC SERIES PUMPS ARE MADE OF EXCEPTIONALLY ROBUST HEAVY GAUGE CAST
IRON, ABRASION RESISTANT AND LONG-LASTING, WITH A SINGLE-CHANNEL
IMPELLER WHICH CAN HANDLE LIQUIDS WITH SUSPENDED SOLIDS AND SHORT
FIBRES. THEY ARE IDEAL FOR SEWAGE, WASTE AND GROUND WATER, EVEN WITH
SOLIDS OR MUD, AND ARE THEREFORE RECOMMENDED FOR BUILDING OR INDUSTRIAL
EFLUENT AND DRAINAGE OF LARGE AREAS SUCH AS CAR PARKS.
CONSTRUCTION CHARACTERISTICS
- PUMP BODY, MOTOR CASING: cast iron.
- IMPELLER: single-channel, in cast iron .
- BASE: stainles steel AISI 304.
- MOTOR SHAFT: stainles steel EN 10088-3 - 1.4057.
- DOUBLE SEAL: mechanical seal silicon carbide - widia - NBR , with
oil barrier chamber and inner lip seal to protect the seal in the event
of dry running.
- MOTOR: submersible asynchronous, 2 pole, for continuous duty.
- MCm: single-phase 220÷240 V - 50 Hz
- Models up to 1.5 kW have built in thermal protection - 2.2 kW
single-phase versions have a thermal protector provided in the winding
for connection to the control box.
- MC: three-phase 380÷415 V - 50 Hz.
- - Thermal protectors are provided in the winding for connection to the external control panel
- INSULATION: clas F .
- PROTECTION: IP 68.
STANDARD FEATURES:
- MCm (single-phase) Float switch.
- 10m "H07 RN-F" submersible power cable with Schuko plug.
- 1.1 to 1.5 kW models are supplied with control box with capacitor and manual reset motor protector.
- 2.2 kW models are supplied with control box type QES 300 MONO.
- MC (three-phase) 10m "H07 RN-F" neoprene power cable
|
|
;)