RANGE OF PERFORMANCE
- Flow rate up to 200/ 12000
- Head up to 17 m
LIMITS OF USE
- Depth up to 10 m
- Liquid temperature up to + 40°C
- Passage of suspended solid bodies up to Ø 10 mm
- Drainage level to 15 mm from the bottom
- For continuous duty: minimum immersion 210 mm from pump base
INSTALLATION AND USE
DC SUBMERSIBLE PUMPS, MADE OF EXCEPTIONALLY STURDY HEAVY-GAUGE CAST
IRON, RESISTANT TO ABRASION AND LONGLASTING, ARE RECOMMENDED FOR
DRAINING CLEAR OR SLIGHTLY DIRTY WATER AND FOR DISPOSING OF NON-SEWAGE
WASTE WATER; THEY ARE OUTSTANDING BOTH IN THEIR STURDINESS AND THEIR
RELIABILITY IN FIXED INSTALLATIONS WITH AUTOMATIC OPERATION.
CONSTRUCTION CHARACTERISTICS
- PUMP BODY: cast iron, with threaded port ISO 228/1.
- MOTOR CASING: cast iron.
- SUCTION GRID: stainless steel AISI 304.
- IMPELLER: cast iron.
- MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
- DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil
barrier chamber and inner lip seal to protect the seal in the event of
dry running.
- MOTOR: submersible asynchronous for continuous duty.
- DCm: single-phase 220÷240 V - 50 Hz with thermal overload protector.
- DC: three-phase 380÷415 V - 50 Hz.
- INSULATION class F.
- PROTECTION: IP 68.
STANDARD FEATURES:
- DCm (single-phase) Float switch.
- Neoprene power cable "H07 RN-F" length 10 metres with Schuko plug.
- Electric panel with capacitor.
- DC (three-phase) Neoprene power cable "H07 RN-F" length 10 metres.
|
|
;)